loading

30+ Years Experienced custom fastener manufacturer &  factory committed 0 PPM for production

Custom Shoulder Screws for Automation Fixtures: An RFQ Guide

A practical drawing and inspection checklist for shoulder screws used in moving fixtures

Concept illustration of a shoulder screw at an automation fixture linkage with headline Shoulder Screws and subtitle Automation Fixture Guide

Custom Shoulder Screws for Automation Fixtures: An RFQ Guide

Prepare a shoulder screw enquiry with clear working dimensions, mating-part information, assembly conditions and inspection requirements for automation fixtures.

A shoulder screw can provide a defined unthreaded surface for a moving or locating component while its threaded end secures the assembly. For an automation fixture enquiry, specify the shoulder diameter and length together with the mating geometry, thread, operating conditions and agreed inspection method. The design owner must determine the fit and acceptance criteria for the actual mechanism.

Define the shoulder screw's role in the fixture

A shoulder screw has a head, an unthreaded shoulder and a threaded section. MISUMI describes examples where the shoulder serves as a pivot, a guide for a sliding part or a mounting surface for a bearing. The relevant working dimensions therefore extend beyond the thread designation.

In an RFQ, describe the function of the particular joint instead of asking for a generic shoulder bolt. Identify the fixed part, the moving part and the direction of movement. A sketch can help the supplier understand the role of each surface, but the released drawing should remain the controlling document.

  • Identify whether the feature guides, locates or supports a component.
  • Show the moving and stationary parts in their assembled positions.
  • Name the responsible design contact for unresolved interface questions.

Sources: MISUMI: Shoulder Screws and Common Applications

Specify the shoulder and its mating feature together

Shoulder diameter and length are working dimensions in many applications. The required relationship depends on the mating bore or component as well as the screw itself. A nominal diameter alone does not describe the allowed fit or provide an inspection limit.

Provide the drawing limits and references approved by the mechanism designer. Include the mating component drawing when it is available and indicate which surfaces actually contact during service. Avoid copying a fit class from an unrelated mechanism: the acceptable clearance or restriction must be determined for the specific assembly.

  • Shoulder diameter, length, limits and the drawing's datum references.
  • Mating bore or bearing information and the intended relationship.
  • Relevant surface requirements specified by the design owner.
  • Any controlled transition or edge features shown on the released drawing.

Sources: MISUMI: Shoulder Screws and Common Applications

Show how the threaded end is retained

The threaded section is part of the full interface. Include its designation, length and mating-part details, along with the approved assembly arrangement. MISUMI notes that a shoulder screw can still be over-tightened, so tightening requirements should come from the responsible design authority for the complete joint.

Do not substitute a thread, add a locking device or specify a torque solely from a catalogue example. If the quotation proposes a change, make that difference visible and send it for engineering review before ordering. This guide does not prescribe a universal installation torque or minimum engagement length.

  • Provide the mating thread and receiving material.
  • Include the approved screw head and drive clearance.
  • Identify applicable assembly instructions or open design questions.
  • Record any proposed change to the released configuration.

Sources: MISUMI: Shoulder Screws and Common Applications

Use a drawing package rather than a catalogue match alone

NBK's shoulder bolt catalogue distinguishes the thread, shoulder diameter and length alongside head and drive dimensions for its own product range. This is a useful example of the information that can differ between otherwise similar looking fasteners; its catalogue values should not be treated as specifications for another manufacturer's custom part.

For a custom enquiry, include the assembly drawing, part drawing and revision identifiers. State whether a feature is essential to the mechanism or is a noncritical envelope. This distinction is a purchasing recommendation to support technical review, not a replacement for the formal drawing requirements.

  • Part and assembly drawings with current revisions.
  • Material and finish requirements already approved for the project.
  • Functional features and the corresponding inspection references.
  • Quantity, requested samples and the contact responsible for approval.

Sources: NBK: Hex Socket Shoulder Bolt Catalogue

Agree on a sample and inspection plan

A supplier and buyer should agree on the sample configuration and the evidence requested for critical dimensions before releasing production. For a fixture pivot, that discussion may include how the shoulder and mating feature will be assessed against the project drawing. The design authority must determine the actual methods, quantities and acceptance limits.

Keep the sample's drawing and finish revisions with its report. If the assembly is changed after review, determine whether the evidence still applies. These are recommended RFQ coordination steps; no specific testing capability or inspection result is implied for Chuanghe Fasteners.

  • Identify dimensions and characteristics that require reported measurements.
  • Agree on measurement references and the format of the evidence.
  • Document how deviations will be reviewed and who approves them.
  • Keep sample and production revisions traceable in the order.

Sources: NBK: Hex Socket Shoulder Bolt Catalogue

Prepare a clear RFQ for a custom fixture fastener

When contacting Chuanghe Fasteners, package the component drawing with the mating and application information needed to evaluate the request. Ask for feasibility against those inputs and request that any exceptions be identified. This is an enquiry checklist, not a claim that a particular shoulder geometry, certification or fixture project has already been validated by the company.

Compare quotations against the same released requirements. Where dimensions, material or inspection details are incomplete, list them as questions rather than filling them with assumptions. The final design and its suitability for a moving mechanism remain the responsibility of the equipment designer.

  • Released part and assembly drawing revisions.
  • Shoulder, thread, head and mating-interface requirements.
  • Operating environment and known service conditions.
  • Sample expectations, inspection records and approval responsibility.
  • A list of unresolved questions and restrictions on substitutions.

Sources: NBK: Hex Socket Shoulder Bolt Catalogue; MISUMI: Shoulder Screws and Common Applications

Frequently asked questions

What does a shoulder screw do in an automation fixture?

Depending on the design, the unthreaded shoulder can act as a surface for a pivoting, sliding or locating component. The specific function and limits must be defined for the mechanism.

Sources: MISUMI: Shoulder Screws and Common Applications

Is a thread size enough to specify a shoulder screw?

No. Include the shoulder diameter and length, the mating feature and the other drawing requirements. The appropriate fit and tolerances depend on the particular assembly.

Sources: NBK: Hex Socket Shoulder Bolt Catalogue

What should a custom shoulder screw RFQ include?

Provide the released part and assembly drawings, shoulder and thread requirements, mating information, approved material and finish, sample expectations and inspection responsibilities.

Sources: NBK: Hex Socket Shoulder Bolt Catalogue

Related reading

References

  1. MISUMI: Shoulder Screws and Common Applications
  2. NBK: Hex Socket Shoulder Bolt Catalogue

prev
Captive Panel Screws for Server Enclosures: An RFQ Guide
recommended for you
GET IN TOUCH WITH Us

CHUANGHE INDUSTRIAL(HK) LIMITED Chuanghe Fastener Co, Ltd. (CHE )  offers OEM & ODM & Customized services to customer, which included cold heading, CNC processing center, wire cutting, powder metallurgy processing and assembly of metal parts with plastic parts.We have industry leading quality inspection equipment such as 3D scanner, Ultrasonic Flaw Detector etc  

Contact with us
Tel: +86-186 0769 4667

Add:
RM302, No.4 building Lizhou industrial Park, Shangshanqi, Zhushan District, Dongcheng Town, Dongguan City, China

FLAT/RM A  15/F GOLDFIELD INDUSTRIAL BUILDING 144-150 TAI LIN PAI ROAD KWAI CHUNG
Copyright © 2026 Chuanghe Fastener Co, Ltd. (CHE )  | Sitemap  | privacy policy
Contact us
whatsapp
Contact customer service
Contact us
whatsapp
cancel
Customer service